Custom Ram-Air Installation This is our finished product, with me leaning across the hood, as it's a lot to take in, you know. Cutting your hood up and all. It's doable though and easy too! Just please read the instructions carefully before you do anything to your hood. Hoods are not cheap!
Review ItRate ItForward It
Electric Vehicle Conversion of a 1996 Saturn Complete online diary showing the conversion of a 1996 Saturn SL1 sedan to electric power. Hundreds of images and lots of text describing the complete project. This site gets visitors from all over the world.
Review ItRate ItForward It
Fast Turn Signals There are several way to get you turn signals blinking faster. Each of these way drops the votage to your turn signals. There are several methods; some require cutting exisiting wires and others do not.
Review ItRate ItForward It
Find Your Way Under the Hood A quick and easy guide to preventive maintenance for the self-serve customer. Regular maintenance checks and simple service can greatly reduce the cost of car ownership.
Review ItRate ItForward It
Front Sway Bar Installation This is not a "by-the-numbers" tutorial. Use the information below at your own risk. I did it this way and it worked. That doesn't mean it's the right way to do it.
Review ItRate ItForward It
Hood Scooped Saturn I designed my ram air setup a little different from BIll Deebs and some other saturns that I was inspired by. I did not create this project, this is just my interpretation of it.
Review ItRate ItForward It
How to Bleed Brakes - The Right Way The role of the brake fluid within the braking system is to transfer the force from the master cylinder to the corners of the car…and a vital characteristic of brake fluid that allows it to perform its task properly is its ability to maintain a liquid state and resist compression.
Review ItRate ItForward It
Installing A Cargo Net Installation of a Saturn cargo net is fairly straightforward. It takes about 1.5 hours to do the job correctly. The hardest part is measuring the interior to make sure you're putting the mounting posts for the nets in the right place.
Review ItRate ItForward It
Pacesetter Exhaust Installation Recently, SPS had the opportunity to install a Pacesetter exhaust system on a 96 SC2. We wanted to see for ourselves why the unit is so cheap. And the installation provided us with a chance to conduct a hands-on evaluation.
Review ItRate ItForward It
Rear Sway Bar Installation To do this job by the book, you should have on hand a brake bleeder kit (non-ABS cars). For vehicles with ABS, the brakes need to be serviced using a SCAN tool for proper operation.
Review ItRate ItForward It
