i need help moding

[blue2003QC]

ok i have 2003 ion QC
i would like to
lower the car
put hids in (that works both low and high beams)
maybe an exhaust

please post and if you have any idea's please post with a link where to buy from

[SaturnRaycer]

Originally Posted by blue2003QC

ok i have 2003 ion QC
i would like to
lower the car

Tire Rack has a good selection of suspension parts including lowering springs. Here's a link to that page. http://www.tirerack.com/suspension/s...perfCode=P"]"]

put hids in (that works both low and high beams)

Don't do it, it just makes people hate you. HID's in conventional reflector type lamps are often the worst offenders for glare because the focal point of the HID capsule and a conventional bulb are different. Get a set of Silverstar Ultra's if you want a whiter light.

maybe an exhaust

Get friendly with a local custom exhaust shop. It won't cost you any more than trying to find a "kit". Saturns aren't Hondas - there isn't a lot of aftermarket support.

please post and if you have any idea's please post with a link where to buy from

Hope this helps.

[bmxracerchamp12]

eibach's and meagan springs are good. depends on the drop. i would recommend an injen intake, it makes your car sound b.a. and an exhaust will be even better.

[blue2003QC]

ok i found lowering spring for like 120 does that sound right also does anyone have them if so can i see pics thank (the MEGAN LOWERING COIL SPRINGS)

and all the intakes i looked at either dont fit the 2003 or over 200 buck

[bmxracerchamp12]

i dont know much on the suspension but search the modding section for lowering threads. but i paid 240 shipped on my intake. dont do a weapon r intake

[IONSedan]

Check with the people on ION forums dot net

[2006 ion2]

if you're going to advise people, learn to spell.

[Joshua34]

There is nothing wrong with the weapon r intake. You have to work at getting the parts to fit cause its a tight fit but you will like it. I got mine for 145.00 including shipping.

[chilipepper1327]

Ok, so I want to lower my car 2" in the rear, 1.5 in the front. What is the best way to go?