View Single Post
Old 05-08-2021, 09:39 PM   #6
Junior Member
Undertake72 is on a distinguished road
Join Date: Apr 2021
Posts: 10
Default Re: 1998 sc2 tach issues still

Ok so on my tach adapter "per autometer" I connected the red/ green wire to the ignition module side .. Then the red wire to the pcm side of the brown/ white wire then I got no signal at all at tach ... Brown/white wire is cyl 4 signal output .. With adapter tach didnt work ... Without adapter I got 1/4 signal ... The white wire at the module I got half the signal on tach .. Havent tried the adapter on that wire yet ... But I'm not optimistic on that wire either ... Grrrrrrrr
Undertake72 is offline   Reply With Quote