Thread: Idle
View Single Post
Old 07-24-2006, 05:21 PM   #6
New Member
Dan48382 is on a distinguished road
Join Date: Jul 2006
Posts: 5

1995 SC2
Default Re: Idle

A huge THANKS to Wolfman. This last weekend I checked it out. I can see why you said to use the plastic end of a screwdriver, there wasn't enough room to get in a good swing with my hammer . Anyhow while checking the location of the IAC I noticed that the plate in the throttle body seemed to be sticking a little.

I picked up some CRC air intake cleaner and got the area around the IAC and the Plate as best as I could.

Now when I put in the clutch the Idle slowly drops to about 900 and no further (about 100 rpm faster than before).

Thanks again for the help
Dan48382 is offline   Reply With Quote