View Single Post
Old 07-14-2016, 08:40 AM   #7
RB56
Junior Member
RB56 has a spectacular aura aboutRB56 has a spectacular aura aboutRB56 has a spectacular aura about
 
Join Date: Jun 2016
Posts: 28
Default Re: 02 SL2 Injectors not pulsing

The fuel pressure test was 45 psi throughout start attempts.

The reason I assumed dieseling is because it only does it if I spray starting fluid. If I spray gasoline in I get nothing. It doesn't start even with the starting fluid, only shakes like a dieseling engine.

Also, like I said there is no spark at the plugs during start attempts (which I had not confirmed before the original post).

I didn't do the compression test on all cylinders because I was just trying to confirm that the timing belt/chain was ok. I will test again and include all cylinders. What is the acceptable compression range?

If I am getting no spark, and the plugs are not wet after start attempts would that point to the ckp sensor circuit? If so, what would I test next?
RB56 is offline   Reply With Quote