SaturnFans.com Forums

SaturnFans.com Forums (http://www.saturnfans.com/forums/index.php)
-   S-Series Tech (http://www.saturnfans.com/forums/forumdisplay.php?f=39)
-   -   P0107 map (http://www.saturnfans.com/forums/showthread.php?t=230247)

bbender 02-28-2017 09:05 AM

P0107 map
 
I have a 1999 Saturn SL2. It runs poorly (limp mode?). Codes are: P0107, P0341 and P0404. I am most concerned with the P0107. I have replaced the MAP sensor with no change in condition. I have checked the 3 wires in the MAP sensor and I have good power, ground and signal.

I am thinking the problem must be the signal wire between the MAP sensor and the PCM. I will check that next. Anything else I should be checking? Thanks!

OldNuc 02-28-2017 10:00 AM

Re: P0107 map
 
That would be a good thing to check. Verify that intake manifold pressure is actually reaching the MAP as well.

billr 02-28-2017 11:14 AM

Re: P0107 map
 
Another example of where live-data can check it (the MAP system, in this case) in mere seconds.


All times are GMT -4. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
SaturnFans.com. The Saturn Enthusiasts Site.