![]() |
P0107 map
I have a 1999 Saturn SL2. It runs poorly (limp mode?). Codes are: P0107, P0341 and P0404. I am most concerned with the P0107. I have replaced the MAP sensor with no change in condition. I have checked the 3 wires in the MAP sensor and I have good power, ground and signal.
I am thinking the problem must be the signal wire between the MAP sensor and the PCM. I will check that next. Anything else I should be checking? Thanks! |
Re: P0107 map
That would be a good thing to check. Verify that intake manifold pressure is actually reaching the MAP as well.
|
Re: P0107 map
Another example of where live-data can check it (the MAP system, in this case) in mere seconds.
|
All times are GMT -4. The time now is 05:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
SaturnFans.com. The Saturn Enthusiasts Site.