Ignition Wires?

richpor · 06-20-2007, 10:20 AM

Hi.

Been doing some reading on the dreaded p0340 and p0341 codes. I've got the p0341 and I know that my wires need replacement. I'm going to start there and clean up the grounds and coil packs at the same time. Question... Are Bosch wires okay. I've got a choice between dealer ($$$) Cahmpion ($) or Bosch ($) - on sale.

Thanks,

pcandpc · 06-20-2007, 10:24 AM

Speaking from experience with aftermarket plugs and wires on a 1992 SL2, I would DEFINATELY go with Saturn plugs and wires.

MickSaturn · 06-20-2007, 10:47 AM

If you're going to spend the money on Saturn wires, You should pull your plugs and make sure you don't have any oil in the wells. If you do have oily plugs, it may be a good time to replace your valve cover gasket (well it's not really a gasket...more like form-a-gasket) before ruining your new wires' boots. I've used both dealer and OEMs (non-Bosch) from the local auto parts shop and haven't noticed a difference.

richpor · 06-20-2007, 11:37 AM

it's a SOHC, there are no valleys..

MiSaturn · 06-22-2007, 07:41 PM

I went with the Delphi ones because of their exact fit, got a little wire keeper with them, and the fact that I hate Botch products... .

06-20-2007, 10:20 AM	#1
richpor Junior Member Join Date: Feb 2006 Posts: 20	Ignition Wires? Hi. Been doing some reading on the dreaded p0340 and p0341 codes. I've got the p0341 and I know that my wires need replacement. I'm going to start there and clean up the grounds and coil packs at the same time. Question... Are Bosch wires okay. I've got a choice between dealer ($$$) Cahmpion ($) or Bosch ($) - on sale. Thanks,

06-20-2007, 10:24 AM	#2
pcandpc Junior Member Join Date: Feb 2004 Posts: 38	Re: Ignition Wires? Speaking from experience with aftermarket plugs and wires on a 1992 SL2, I would DEFINATELY go with Saturn plugs and wires.

06-20-2007, 10:47 AM	#3
MickSaturn Member Join Date: May 2006 Location: VA Posts: 156 1994 SL2	Re: Ignition Wires? If you're going to spend the money on Saturn wires, You should pull your plugs and make sure you don't have any oil in the wells. If you do have oily plugs, it may be a good time to replace your valve cover gasket (well it's not really a gasket...more like form-a-gasket) before ruining your new wires' boots. I've used both dealer and OEMs (non-Bosch) from the local auto parts shop and haven't noticed a difference.

06-20-2007, 11:37 AM	#4
richpor Junior Member Join Date: Feb 2006 Posts: 20	Re: Ignition Wires? it's a SOHC, there are no valleys..

06-22-2007, 07:41 PM	#5
MiSaturn Senior Member Join Date: Feb 2004 Location: Detroit, MI Posts: 1,286 2002 SL 1993 SL2	Re: Ignition Wires? I went with the Delphi ones because of their exact fit, got a little wire keeper with them, and the fact that I hate Botch products... .

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ignition wires, again	Tom of Detroit	S-Series Tech	4	11-16-2009 09:52 PM
ignition, plugs and wires	97sleeper	S-Series Mods	43	09-19-2006 05:14 PM
Wires dealing with ignition.	dw97sc1	S-Series Tech	4	08-14-2006 12:28 AM
Question about ignition wires	JrDave2324	Mods and Performance	6	06-16-2002 07:26 PM
ignition wires	chulo	Mods and Performance	1	05-14-2001 10:12 PM