![]() |
|
![]() |
#1 |
Senior Member
![]() |
![]()
Well i go to check my rear brakes and i notice this lil bar has ripped right thru the rubber bushing and is just hanging there...rear sway bar link?? Anywho my question is this...to remove/replace it do i just take out those bolts and are there already bolts supposed to be attached to the replacement? Do i need to jack up the rear end suspension to do this job? The 2 pics on the left are the drivers side and the other 2 are passenger which wiggles a lot so im guessing its on its way out too. Thanx in advance
Scott
...
If you dont like the tires ur on...change em...now how does that apply to life??? think about it. |
![]() |
![]() |
SaturnFans.com Sponsored Links |
![]() |
#2 |
Super Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Just lift the car, remove the wheel and remove the nuts holding it on. Might have to spray some sort of penetrating oil in it with all that rust on there.
They're $40.12 at saturnparts.net |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() |
![]()
Each or Paired?
...
If you dont like the tires ur on...change em...now how does that apply to life??? think about it. |
![]() |
![]() |
![]() |
#4 |
Super Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
That is each
|
![]() |
![]() |
![]() |
#5 |
Member
![]() Join Date: Jan 2005
Location: Central PA
Posts: 109
1996 SL2
1999 SC2
|
![]()
I just replaced mine on my 1996 sl2. It seems to be a common problem. The round metal grease caps/covers on the back of the "ball and socket" joints fall off---grease gets washed away and you have metal on metal wear until finally they come apart.
I've looked everywhere for an aftermarket part with no luck. You're stuck paying a fortune at your dealer. |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() |
![]()
^^^ Dammit^^^
...
If you dont like the tires ur on...change em...now how does that apply to life??? think about it. |
![]() |
![]() |
![]() |
#7 |
Member
![]() |
![]()
Does a 2003 LW200 have rear sway bar links?
|
![]() |
![]() |
![]() |
#8 |
Master Member
![]() ![]() |
![]() |
![]() |
![]() |
![]() |
#9 | |
Master Member
![]() Join Date: Aug 2007
Location: London, ON
Posts: 3,077
1996 SL2
2000 SW2
|
![]() Quote:
![]()
...
1996 SL2 5MT 1997 SL1 5MT 2000 SW2 5MT All gone, but not forgotten. |
|
![]() |
![]() |
![]() |
#10 |
New Member
![]() Join Date: Jan 2013
Posts: 1
|
![]()
i have found the rear sway bar links at oreilly auto parts if it helps you out
|
![]() |
![]() |
![]() |
#11 |
Member
![]() ![]() ![]() ![]() Join Date: Feb 2015
Location: Colorado
Posts: 68
2000 SL2
|
![]()
wrong thread sorry
Last edited by dylank; 06-12-2015 at 11:09 PM. Reason: wrong thread sorry |
![]() |
![]() |
![]() |
#12 |
Member
![]() ![]() ![]() Join Date: Nov 2013
Location: NW of Ann Arbor, MI
Posts: 311
1999 SL1
|
![]()
I just spent some time scrolling through Ebay and there are many kinds of rear links available. (Like the ones you need) I'm going to check mine out next week.
|
![]() |
![]() |
![]() |
#13 |
Advanced Member
![]() ![]() ![]() Join Date: Jan 2007
Posts: 923
1997 SL2
|
![]()
Had a clunk in rear and thought it was links. Checked them this morning and they seem in good shape. Couldn't isolate any other part as suspect.
...
Bill from Extreme Southern North Carolina '97 Satty SL2 280Kish miles |
![]() |
![]() |
![]() |
#14 | |
Senior Member
![]() ![]() ![]() ![]() |
![]() Quote:
Great pics, BTW! |
|
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Aug 2006
Location: Massachusetts
Posts: 1,139
1997 SW2
1995 SC2
|
![]()
I had a clunk in the rear of my SC2 the sway bar bracket on the strut had broken off
...
1992 SC 1995 SC2 1994 SW2 1997 SW2 others in my yard 1995 SC2 |
![]() |
![]() |
![]() |
#16 |
Master Member
![]() ![]() ![]() |
![]()
That is what I recently installed. Were in a Carquest Box. Was an upgrade.
...
Truth alone triumphs, not untruth. |
![]() |
![]() |
![]() |
#17 |
Advanced Member
![]() ![]() ![]() Join Date: Jan 2007
Posts: 923
1997 SL2
|
![]()
Hmmm
Sprayed links with PB Blaster and my clunk is gone. At least when I manually bounce the car with downward pressure on rear driver side. It would pop or clunk before.
...
Bill from Extreme Southern North Carolina '97 Satty SL2 280Kish miles |
![]() |
![]() |
![]() |
#18 |
New Member
![]() Join Date: Aug 2016
Posts: 1
|
![]()
How difficult is it to replace the rear sway bar links yourself?
|
![]() |
![]() |
![]() |
#19 |
Master Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Join Date: Oct 2016
Location: Poplar Grove, IL
Posts: 3,837
1999 SL2
1998 SC2
|
![]()
It is very easy, unless the nuts are rusted on. Even then you can get them with heat and penetrating oil.
Welcome to the forums!
...
Bryan Cotton '99 SL2, 5SP bought new Rebuilt at 204,067 September 2017 Engine, subframe, diff pin mod, brake lines, headliner, alternator, and so on! '98 SC2, 5SP bought 2018 |
![]() |
![]() |
![]() |
Bookmarks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sway bar link again | BPc | Ion Tech | 13 | 10-29-2008 02:11 PM |
Sway bar link | kaviation | Ion Tech | 5 | 04-21-2008 01:31 AM |
Rear sway bar link | Ryan from Ohio | S-Series Tech | 3 | 05-09-2007 06:24 PM |
Odd looking new rear sway bar link PICS | nmsaty | S-Series General | 11 | 04-25-2006 08:37 PM |
Finally broke part of rear sway bar link HELP! | nmsaty | S-Series General | 8 | 04-22-2006 11:55 AM |