SaturnFans.com
what's new (beta) - classifieds - forums - photos


Go Back   SaturnFans.com Forums > Models > Saturn S-Series > S-Series Tech
Register FAQ Members List Groups Calendar Chat Room Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools Display Modes
Old 03-07-2001, 03:05 PM   #1
t3junkie
New Member
t3junkie is on a distinguished road
 
Join Date: Mar 2001
Location: Portland OR
Posts: 3
Default Timing belt replacement-help-

My 92 SL2 (twin cam ) motor is about to throw the timing chain.
It makes a huge clicking noise when running and when i placed my hand on the valve cover ( facing motor ,left side) i can actually feel the chain hitting the inside of the cover.

My question is this: what is the difficulty in replacing this? I have done the timing chain on an old V-8 , many years ago. Is there only one chain spining both cams? Or does one cam spin the other? How hard is it to pull the drive gears?....i am at a loss here, any info would be helpful.---
Thanks--

REWARD EXCELLENCE!

Add to t3junkie's Reputation
Rate the quality of this post and help t3junkie reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
t3junkie is offline  
SaturnFans.com Sponsored Links
Old 03-07-2001, 03:41 PM   #2
eRic 02sc2
Super Member
eRic 02sc2 has a spectacular aura abouteRic 02sc2 has a spectacular aura about
 
eRic 02sc2's Avatar
 
Join Date: Feb 2000
Location: Closed Course. Professional Driver.
Posts: 14,542
 
Default

there is one chain (not a belt) that drives both cams. i'd suggest getting a chiltons manual or getting a copy of the saturn factory service manual before attempting to replace it.

REWARD EXCELLENCE!

Add to eRic 02sc2's Reputation
Rate the quality of this post and help eRic 02sc2 reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
eRic 02sc2 is offline  
Old 03-07-2001, 08:13 PM   #3
Esteban
Guest
 
Posts: n/a
Default

Do not let the chain break! Change it now!!! Much tougher job than a # 350 or # 302, etc.
dealer sells a FULL PARTS KIT.About $ 140. Repalce every part. dealer gets approx. $ 500 800 for job/ incl parts. get a manual & try it if you wish. Knuckle-buster of a job= 4-5 hours for a fist timer.

REWARD EXCELLENCE!

Add to Esteban's Reputation
Rate the quality of this post and help Esteban reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
 
Old 03-07-2001, 11:25 PM   #4
Saturnmeister
Senior Member
Saturnmeister is on a distinguished road
 
Saturnmeister's Avatar
 
Join Date: Feb 2000
Posts: 1,409
Default

If you DO let that timing chain break before you replace it, then YOU'LL NEED TO REBUILD THE WHOLE ENGINE! Don't even START the thing again until you have a new chain in it!!!

REWARD EXCELLENCE!

Add to Saturnmeister's Reputation
Rate the quality of this post and help Saturnmeister reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
Saturnmeister is offline  
Old 03-08-2001, 02:56 AM   #5
knowitall
New Member
knowitall is on a distinguished road
 
Join Date: Dec 2000
Posts: 6
Default

okay here's the deal. Don't be scared of the car. It's just nuts and bolts. Your Saturn needs your help, and you need my help. Here's the basics: support motor w/ a jack, remove motor mount, belt, p/s pump, idler pulley, cam cover, belt tensioner, all front cover bolts that you can reach, and anything else that may interfere w/ front cover removal. It's pretty straightfoward, just use your head. Remove RF wheel, plastic splash shield, crank pulley (It's gonna be tight), water pump pulley, rest of front cover bolts, 4 oil pan - to - front cover bolts, and even the lower mount if you feel like it. Again, look to see if anything else is in the way of the almighty front cover. Double check to see if ALL bolts are removed. (there's one up top near the middle). Gently pry the oil pan away from the cover, and pry the cover away from the block. Pull that sucker outta there. Now rotate the crank so the mark is up top. Make sure the cam marks are up top, too. Remove ALL timing chain junk, like tensioner, cam sprockets, all guides, etc. Slap that fancy new chain on there, aligning 2 colored marks on the chain w/ marks on the cams, and the other mark at the 6 o'clock position on the crank sprocket, which you also should have replaced. Install those neat, expensive, new parts. That oil pump cover and bolts? Pull your old one off of the front cover, clean out the pump, reinstall the way it came out, and use that nice clean oil pump cover. Yank out that little yellow thingy on the new tensioner, and rotate the crank 2 full turns clockwise and pray everything lines up again. Easy, huh? Clean front cover and engine seal surface, seal it up with the stuff they sell at the dealership, (forgot that part, huh?) and basically reattach everything you ripped off when you started. Piece of cake when you know it all. . . . .

REWARD EXCELLENCE!

Add to knowitall's Reputation
Rate the quality of this post and help knowitall reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
knowitall is offline  
Old 03-08-2001, 03:43 AM   #6
Boog
Member
Boog is on a distinguished road
 
Join Date: Feb 2001
Location: Ft.Myers Fl.
Posts: 73
Default

mr knowitall plz tell me your name isnt Jim o plz plz plz.

REWARD EXCELLENCE!

Add to Boog's Reputation
Rate the quality of this post and help Boog reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
Boog is offline  
Closed Thread



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
timing belt replacement marathoner Vue Tech 29 09-28-2011 10:17 PM
Log: Timing belt replacement s3nfo L-Series Tech 20 04-06-2009 01:50 PM
Timing belt replacement. VueGuy168 Vue Tech 15 03-03-2009 10:17 AM
Timing Belt Replacement jsdailey Vue General 9 11-17-2007 02:57 PM
Timing Belt Replacement hugh S-Series Tech 13 06-15-2001 12:15 PM


All times are GMT -4. The time now is 11:48 AM.

Advanced Forum Search | Advanced Photo Search


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SaturnFans.com. The Saturn Enthusiasts Site.