Rear Sway Link Torque Specs

[carvinbassplyr]

Does anyone know what the torque specs are for the control arm portion of the rear sway link assembly? I have a feeling I severely overtightened them when I replaced them the first time and 1 has already gone bad. Thanks in advance!

[cykopat]

Originally Posted by carvinbassplyr

Does anyone know what the torque specs are for the control arm portion of the rear sway link assembly? I have a feeling I severely overtightened them when I replaced them the first time and 1 has already gone bad. Thanks in advance!

Not sure if this helps.

Control Arm Pivot Bolts

Upper Control Arm:
- To Knuckle: 118 Ft-lbs 160 Nm
To Suspension Support:
- 12 mm bolt 81 Ft-lbs 110 Nm
- 14 mm bolt 118 Ft-lbs 160 Nm
Lower Control Arm 81 Ft-lbs 110Nm

Stabilizer bar link-to-lower control arm nut 132 in-lbs 15 Nm
Stabilizer bar link-to-stabilizer bar nut 35 Ft-lbs 47 Nm
Stabilizer bar bushing/retainer bolts 52 Ft-lbs 71 Nm

And I see this is from 2019. RiP