what's new (beta) - classifieds - forums - photos

Go Back Forums > Models > Saturn S-Series > S-Series General
Register FAQ Members List Groups Calendar Chat Room Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-09-2009, 04:36 PM   #1
Junior Member
sr20fd3st is on a distinguished road
Join Date: Jan 2009
Posts: 26
Default Need pic of cam sprocket retention tool and valve spring removal tool

Hi. I used to have a nice subscription to alldata but it is now expired.

I need to throw in some new valve stem seals on my 99 SW2 and dont feel like pulling the head (since I just rebuilt everythign inside).

bought a junk yard head to replace the old cracked one, and the valve seals are shot. Im losing alot of out out the ass, as well as pissing off anyone behind me.

I know there is a tool for removing the springs from up top. It was sort of a rail that sat above the head, held up by braces on either side. a pivoting arm with a cum slid back and forth onthe rail and you had to use it to push the valve spring down (either that or the cup had a threaded stud to the arm, which u turned to compress the spring).

Also, there is a small brace that hold the cam sprockets in place so u dont have to pull the timing cover or lose the chain when u pull the cams out.

If anyone has a way to get pics of these tools from any kidn of service manual that would be great. I just need to weld these things up and get this done.



Add to sr20fd3st's Reputation
Rate the quality of this post and help sr20fd3st reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
sr20fd3st is offline   Reply With Quote Sponsored Links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Removal of 96 SOHC Cam Sprocket larrybud S-Series Tech 8 09-21-2009 10:46 PM
valve stem seal removal tool siliconvalley S-Series Tech 6 11-07-2008 01:31 PM
Crankshaft Sprocket Retainer Tool friskyspatula S-Series Tech 5 11-15-2005 12:55 PM
Valve spring Removal tool-Head on Car 91SL2 Classifieds 0 09-11-2005 02:44 PM
crank timing gear retention tool mdfrench Miscellaneous Tech 4 01-05-2005 12:33 AM

All times are GMT -4. The time now is 10:49 AM.

Advanced Forum Search | Advanced Photo Search

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc. The Saturn Enthusiasts Site.