Remote Door Lock?

Applefool · 08-18-2003, 08:57 AM

I'm picking up an alarm with remote start. It also has remote door lock relays. I currently don't have power locks, and don't need the whole power lock switchs, but I do want the power door locks to work with just the remote. My question, does the power door lock actuator bolt up in place of the manual? Are there other parts I would need as well?

Saturn-Eh! · 08-18-2003, 09:05 AM

The actuator will bolt right in, and attach to the lock rods (they are the same if you have power locks, or not), but you will need to run wiring to each of the actuators that you install. You will also need a power lock relay, as the relay in your alarm is for triggering, not the actual operation of the actuators.

08-18-2003, 08:57 AM	#1
Applefool Master Member Join Date: Apr 2002 Location: Rochester, Ny Posts: 2,595 Applefool's Photos 2006 ION Red Line	Remote Door Lock? I'm picking up an alarm with remote start. It also has remote door lock relays. I currently don't have power locks, and don't need the whole power lock switchs, but I do want the power door locks to work with just the remote. My question, does the power door lock actuator bolt up in place of the manual? Are there other parts I would need as well? ... 2011 Audi TT (modified) 2007 Mercedes E550 (stock) 1999 Expedition (Stock) 2007 Ion Coupe (Daughters eventually)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Keyless Remote - Panel Door Lock Button	joeMoe1	S-Series General	1	07-05-2008 12:47 PM
Door lock - key and remote questions	CA-Legal-Vette	Vue General	10	04-16-2008 01:51 PM
Lseries remote door lock	choupets	L-Series Tech	3	10-05-2007 10:31 AM
Installing aftermarket remote start ... power door lock wire?	paulygon	S-Series General	1	05-28-2006 09:35 PM
96 Sl2 Remote Door Lock Problem	TM59	S-Series Tech	4	01-04-2005 03:03 PM

08-18-2003, 09:05 AM	#2
Saturn-Eh! Senior Member Join Date: Jul 2003 Location: The Great White North Posts: 1,715 Saturn-Eh!'s Photos	The actuator will bolt right in, and attach to the lock rods (they are the same if you have power locks, or not), but you will need to run wiring to each of the actuators that you install. You will also need a power lock relay, as the relay in your alarm is for triggering, not the actual operation of the actuators.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)