SaturnFans.com Forums - View Single Post

sspeer · 07-13-2005, 03:38 PM

You can check the 'hardness' of the bolts by how many 'lines' the head has on it. The lines are raised and are aligned radially out from the center of the top of the bolt. I would think that these bolts would have 6 lines in it if they are that small and need such a high torque

Some info:

http://www.engineersedge.com/hex_bol...tification.htm

07-13-2005, 03:38 PM	#11
sspeer Senior Member Join Date: Jan 2004 Location: Illinois Posts: 1,834 sspeer's Photos	Re: Torque on wheel bearing bolts You can check the 'hardness' of the bolts by how many 'lines' the head has on it. The lines are raised and are aligned radially out from the center of the top of the bolt. I would think that these bolts would have 6 lines in it if they are that small and need such a high torque Some info: http://www.engineersedge.com/hex_bol...tification.htm Last edited by sspeer; 07-13-2005 at 03:46 PM.