View Single Post
Old 11-04-2019, 09:14 PM   #7
SuperKONR
Junior Member
SuperKONR is on a distinguished road
 
Join Date: Oct 2019
Posts: 12
Default Re: SL1 Automatic Issues

Quote:
Originally Posted by gveinot View Post
make sure your alternator output is between 13.8 - 14.6 volts while the engine is running. The Saturn Automatic and PCM needs those voltages to run correctly. The solenoids in the valve body that select the gears are all voltage controlled, check the wires from the top of the transaxle to the PCM and make sure none of them are nicked and shorting out with each other or the chassis.
Awesome I will check that out. Thanks!

REWARD EXCELLENCE!

Add to SuperKONR's Reputation
Rate the quality of this post and help SuperKONR reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
SuperKONR is offline   Reply With Quote