View Single Post
Old 12-21-2012, 11:52 AM   #4
bluesl2
Senior Member
bluesl2 is a glorious beacon of lightbluesl2 is a glorious beacon of lightbluesl2 is a glorious beacon of lightbluesl2 is a glorious beacon of lightbluesl2 is a glorious beacon of light
 
bluesl2's Avatar
 
Join Date: Jul 2005
Posts: 1,952
Default Re: L300 issues... please help

The no start after shutting off could also be a failing crankshaft position sensor caused by a hot soak. As for the light issue, that could be a sign of a bcm concern. Both of these could be related to the bcm too. If you have access to a scan tool that reads live data, watch the engine rpm while you are cranking(during the no start). If you have rpm, most likely crank sensor is ok, if not it's toast.

REWARD EXCELLENCE!

Add to bluesl2's Reputation
Rate the quality of this post and help bluesl2 reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
bluesl2 is offline   Reply With Quote