Thread: P0410 Code
View Single Post
Old 09-03-2013, 01:01 PM   #2
BV22
Master Member
BV22 is a glorious beacon of lightBV22 is a glorious beacon of lightBV22 is a glorious beacon of lightBV22 is a glorious beacon of lightBV22 is a glorious beacon of lightBV22 is a glorious beacon of light
 
Join Date: Feb 2011
Location: Texas
Posts: 2,125

2002 SC1
Default Re: P0410 Code

You are on the right track from watching the Richpin video. If your air pump is not running on cold start, that is where you should focus your efforts. I can hear mine run when I have my head under the hood, but if you are not sure, disconnect the big hose that runs from the air pump to the diverter valve at the diverter valve and do a cold start. If the air pump is running, you will get a nice stream of air out of the hose for 30-60 seconds. If the pump is not running, either it is not getting 12V at the connector, or the ground wire connection is flaky.

You can read for hours here with a search of P0410. It is an annoying system.

...
BV22
2002 SC1 5M
RIP Sept 1 2018
315,344 miles

REWARD EXCELLENCE!

Add to BV22's Reputation
Rate the quality of this post and help BV22 reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
BV22 is offline   Reply With Quote