View Single Post
Old 04-06-2016, 12:35 AM   #10
Junior Member
hakachukai is on a distinguished road
Join Date: Apr 2016
Posts: 16
Default Re: 97 SC2 (No ABS) Brake Pedal goes to the floor


I understand what you are saying. The rotors were bolted down during that test. However I didn't use any specific torque. I just put them good and tight.

I'll try the test again with the wheel mounted and properly torqued, but the issue with that is that it's nearly impossible to even see the caliper or rotor with the wheel mounted.

I have obtained a pressure bleeder, so the first thing that I'm going to try is pressure bleeding it to see if there is trapped air in the system anywhere.


Add to hakachukai's Reputation
Rate the quality of this post and help hakachukai reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
hakachukai is offline   Reply With Quote