View Single Post
Old 02-25-2017, 11:03 AM   #6
New Member
betoweb is on a distinguished road
Join Date: Feb 2017
Posts: 1
Default Re: 2008 VUE XE Brakes dragging and locking

Most dragging problems come from the booster rod.It is not allowing the master cylinder to completely release the pressure. There has to be some play between the rod and the master, it is adjustable. Because the lines do not flex, the lines must be removed and the master removed to access the rod adjustment. I reach in with a long pair of pliers to hold the rod from turning and then reach in with a 7 mm socket and give it one whole turn clockwise. That usually does it. (To verify this is your problem, jack up vehicle and tires will not turn, open line at master and wheels will free up.) EVEN A NEW MASTER or BOOSTER HAS TO BE ADJUSTED. i have repaired many this way.


Add to betoweb's Reputation
Rate the quality of this post and help betoweb reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
betoweb is offline   Reply With Quote