View Single Post
Old 08-07-2019, 12:18 PM   #8
Judy'sAstra
New Member
Judy'sAstra is on a distinguished road
 
Join Date: Nov 2016
Posts: 3
Default Re: XE Rear Doors - Wiring

Thanks for reply - Went thru it all again, this time splitting the boot that goes from pillar to door and found another broken wire. In the process managed to blow a fuse which explains the locks not working - Note to self - disconnect the battery lol. Re-soldered all connections again and sealed with heat shrink. All is good now but am going to put a flex wire cover about an inch long in the middle of the boot and seal it with the self vulcanizing tape to waterproof. Seems the problem is that the boot is too short and the covering on the wires to brittle. Thanks again for advice
Judy

REWARD EXCELLENCE!

Add to Judy'sAstra's Reputation
Rate the quality of this post and help Judy'sAstra reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
Judy'sAstra is offline   Reply With Quote