View Single Post
Old 01-24-2016, 12:31 AM   #23
crobey
New Member
crobey is on a distinguished road
 
Join Date: Feb 2006
Posts: 8

1997 SL2
Default Re: Clutch Hydraulics Diagnosis

After several months of difficult shifting I found this article. Spot on!! Since it happened over time I didn't notice the clutch engagement spot moving closer to the floor, but that is what happened. It went from 1 inch from the floor to about 2 inches from the top after replacing the master and slave unit.

If you are going to make the change, just go ahead and change out your motor mount while you have everything taken apart.

Also if you have ABS you don't have to unbolt and move it out of the way but it will be very tight.

REWARD EXCELLENCE!

Add to crobey's Reputation
Rate the quality of this post and help crobey reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
crobey is offline   Reply With Quote