View Single Post
Old 04-16-2005, 11:14 AM   #2
Razorbak
Master Member
Razorbak is on a distinguished road
 
Razorbak's Avatar
 
Join Date: Aug 2004
Location: Chicagoland
Posts: 2,860
 

1996 SL2
Default Re: neutral safety switch

The Park/Neutral Position Switch is attached to the rear side of the automatic transaxle case just above driver's side axle.

It must be installed very carefully or the internal part of the new switch could be damaged. It also requires adjustment when installed, using an ohmmeter or continuity tester to check for continuity across terminals on the switch, before tightening the switch to case bolts.
Razorbak is offline