View Single Post
Old 05-16-2004, 12:19 AM   #3
Lazydog
Member
Lazydog is on a distinguished road
 
Join Date: Sep 2003
Location: Glendale, Arizona
Posts: 124
 
Default

I installed it myself. it wasn't too bad.

On the bottom of each frame rail is a big hole. My kit came with a square piece of metal and a lag bolt to fit up in there.

Then there are 2 threaded holes on each side above the muffler. I would say they are inline with the top of the bumper. Maybe a little lower.

Then there are the two holes in the middle back. Those are the ones everyone has a hard time with. I had a hard time but kept at it. it took about 10 min each side. Once those are in it only took 10 minutes to install the rest of the bolts.
Lazydog is offline