View Single Post
Old 03-10-2012, 03:13 PM   #4
dcflh07
Junior Member
dcflh07 is on a distinguished road
 
Join Date: Jan 2011
Posts: 16
Default Re: 2001 sl ignition wiring diagram

thank you to fdryer and off-track.
1)the crankshafter senser is seated and I'm get the correct ohms and milli volts from it.
2)I have fuel and correct pressure to the cylinders
3)I have battery volt to the ignition module and good ground so my fuse is good, and I checked the fuses also with a meter.
4) I need a wiring diagram to finish checking wires for a 2001 dohc sl. my book only good to 95.
5)yes I have checked both coils for spark and still no spark. I have checked and cleaned both the block and the base plate for ignition module to get good ground and have a good ground.
But as i stated without a good diagram I'm chasing my tail.please read my first letter for more info

REWARD EXCELLENCE!

Add to dcflh07's Reputation
Rate the quality of this post and help dcflh07 reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
dcflh07 is offline   Reply With Quote