View Single Post
Old 03-07-2003, 07:33 PM   #1
benpatient
Senior Member
benpatient is on a distinguished road
 
benpatient's Avatar
 
Join Date: Nov 2002
Location: Nashville
Posts: 1,004
 
Default Wiring configuration in Adv Audio Amp

I've decided to up the power of my sound system, and I have the Adv. Audio already. I'm in an ION3, and it has an amp mounted in the trunk.

the problem is, I can't tell which wires are which, most especially the power, ground, signal, and remote-cutoff. They don't seem to correspond with the "standard" colors that I'm used to with car audio stuff.

Does anyone here have access to the diagrams of the amp?

I have pictures of the thing in my member gallery if you want to get a look.

the black and red wires that are separated from the rest are probably the power and ground wires, but they could also be RCA inputs, which would be nice. I have a feeling that the signal is coming in through one of the higher-guage wires in the big bundle, which is unfortunate, but still acceptable. I basically need to know which wires are

power
ground
signal left channel
signal right chanel
remote cut-off

then i can just splice my way into the loop and go from there.

i already have my own amps and subs, and it would be cool to be able to limit all the wiring to the truck compartment.

any advice?

REWARD EXCELLENCE!

Add to benpatient's Reputation
Rate the quality of this post and help benpatient reputation points. Click the reputation button near the bottom left corner of this message box. Thank you!
benpatient is offline  
SaturnFans.com Sponsored Links