SaturnFans.com Forums

SaturnFans.com Forums (http://www.saturnfans.com/forums/index.php)
-   S-Series Tech (http://www.saturnfans.com/forums/forumdisplay.php?f=39)
-   -   New Engine Install. Need new mounts? (http://www.saturnfans.com/forums/showthread.php?t=57874)

c5f8 07-16-2005 08:41 PM

New Engine Install. Need new mounts?
 
1 Attachment(s)
Along with a new engine and new cradle (see gallery) I'm also installing new late model engine mounts (see attached photo). The bolt that goes into the small end of the dog bone fits extremely loose.

I measured the difference between the hole diameter and the bolt diameter using a dial caliper to be 0.130 inch. When the engine is bolted up, I can shake the engine and it moves substantially.

If I buy new mount inserts, do they sell different sizes of prothane motor mount inserts? Did Saturn change the bolt size after 97?


All times are GMT -4. The time now is 12:52 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SaturnFans.com. The Saturn Enthusiasts Site.