SaturnFans.com Forums

SaturnFans.com Forums (http://www.saturnfans.com/forums/index.php)
-   S-Series Tech (http://www.saturnfans.com/forums/forumdisplay.php?f=39)
-   -   installing a quarter glass window (http://www.saturnfans.com/forums/showthread.php?t=107820)

fusion61 10-18-2007 05:21 PM

installing a quarter glass window
 
Does anyone know how to install the rear passanger side small window i think they call it quarter glass window. I have a 1998 sl1 but i dont know how to install the quarter window can anyone help. Is their diagrams on the net.

Dr B 10-18-2007 05:48 PM

Re: installing a quarter glass window
 
Don't know about the 98 ,but on my 92 S L 2 ......
it is made attached to the window guide ect.
just take off the outer door panel,and unbolt the guide .
the assembly should come out pretty easy .
to remove the outside door handle ,you need to push the core
of the retainer in ,then pull the rest out ,then slide the handle
sideways to release from mounting stubs.
find the core inside the handle ,to be reused.

madpogue 10-18-2007 06:03 PM

Re: installing a quarter glass window
 
[QUOTE=Dr B;1141500]to remove the outside door handle ,you need to push the core of the retainer in ,then pull the rest out ,[/QUOTE] On gen-2s, it's the opposite. You PULL the center-pin out, to "unlock" the rivet, then pull the whole rivet out. If you're really good, you won't bugger it up and can re-use it. AFAIK, everything else works the same as gen-1, even though it looks a lot diff.

For a "model" of the center-pin rivet, look at the rivets holding some of the bumper cover on, or the inner wheel wells. This is a mini version of that rivet.


All times are GMT -4. The time now is 06:39 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
SaturnFans.com. The Saturn Enthusiasts Site.