reprgram PSCM

[Rob Leigh]

Greetings,

After reviewing my shop manual and several of our forum replies, I have concluded that the way to change my standard Vue power steering to RL power steering is to reprogram its PSCM calibration from x to y (values under steering tuning profile 0 to 8). This would give me lower boost on the steering and what else?

The question is what would be the data source: standard vs RL ?

I have a ScanGaugeII and have asked them the same question.

I know it was suggested I sell my 2006 3.5 Vue and buy an RL, but I like what I have with Eibachs, Nokians and Monroes, all around, etc.

Thanks in advance,

Rob

[04Vuesilver]

There are a few things I'd like flashed on mine too, the steering (now that I know of it), the speed limiter, and the torque killing 1st gear setup (then again, I have traction problems as it is)

[D C]

What do you mean "what would be the data source"?
The power steering calibration is already in the controller. It just needs to be told to use that particular one.

[ryanB3]

i would be very interested in this if someone figures out how to do it.