Highbeam Wiring?

[FGCA_XRL]

Anyone know the wire colors and polarities at the stalk? I'm planning on just using a Diode to isolate and feed the low beams when the high beams come on, without any relays and whatnot, and was hoping to find some wiring information before I go out and start on it. And since the wiring is so easily acessed at th stalk(the cover over the wheel pops off sooo easy) I figure I might as well just do it nice and cleanly there.

Thanks

[ssicarman]

Without actualy checking to be sure I would say that the wiring from the headlamp switch goes to the BCM to let it know what to turn on and off.

[ssicarman]

Looks like the headlamp switch does do the headlamps on its own. The BCM controls the auto headlamps and the DRL.

Do you have auto headlamps

[FGCA_XRL]

Yup, auto-headlamps, pulled the DRL relay so that's not an issue anymore.

:cool::D:usa::arr::xeye::hothead::p:zzz::sneeze::u gh::x:whoa::no::cake::cake::cake::

[FGCA_XRL]

ps i'm pretty much a big deal, and pretty bad ass. yes happy birthday to me me me :cake::cake::cake::cake::cake::cake::cake::arr: